ROOM VENTILATION

Room ventilation is a stand alone system used for industry and welding companies where more than source extraction is required. It gives additional cleaning of the production hall with efficient use of energy and reduction of cost by recirculating cleaned warm air back into the working environment.

ROOM VENTILATION

Airtech

Airtech is a stand alone system. It is mainly used for industry and welding companies where a suction solution right at the source can not be installed or where the Airtech unit is used for additional cleaning of the production hall.

The polluted air is sucked into the extraction channels attached on either side of the unit at a height of about 3m and then led into the filter section where the particles stick to the surface of the filter cartridges.

The filter cartridges are automatically air cleaned at preset intervals. The particles are loosened from the surface of the filter and fall into the dust collecting container. The cleaned air is recycled back into the room by individually adjustable

high reach jet nozzles. That way the polluted air is also moved into the direction of the suction canals.

As a safety device the unit is equipped with a particle sensor on the clean air side. This way the system is constantly monitored to protect it from filter breakdowns. If an error occurs, the fan is automatically shut off and simultaneously emits an optical and acoustic warning signal.

 

 

 

Technical Data

10,000-30,000 m³/h

11kw, 15kw, 22kw

≥ 99 %

1880 x 3510 x 6810 mm

(Width incl. canals 4 500 mm, depth incl.

jets 1455 mm)

 

Max. volumetric flow of the fan

Motor performance

Separation efficiency

Dimensions

Part numbers on request

BlowTec

BlowTec is a central suction and filter unit that is a perfect solution for every kind of work that requires more than extraction right at the source. The biggest advantage is the efficient use of energy and reduction of cost. During heating times the energy costs are considerably reduced by recirculating the cleaned, warm air back into the working environment. Alternatively it can be vented to atmosphere. The modular setup of the BlowTec is perfectly adaptable to the architecture of the room. The ducting that extracts the air and guides it to the movable jets can vary in height and length.

Standard dimensions guarantee fast delivery times and quick assembly.

 

 

Features

• Housing made of stable steel plate

(powder coating inside and outside)

• Fully automatic cleaning via POWER

  SPRAY-SYSTEM

• Fan with soundproof housing

• Filter cartridges, category BIA M

• Particle sensor

• Filter unit

• Control (filter/motor)

• Nozzle head

• Silencer

• Connection between filter unit, fan unit

and nozzle head

• Filter medium (precoat)

• PE bag for the dust collecting tray

 

Ordering Information

7 500 – 10 000 m³/h

7,5 – 11,0 kW

≥ 99 %

Max. volumetric flow of the fan

Motor performance

Separation efficiency

Part numbers on request